oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if92.432m-01a 90.432 mhz if saw filter 2.03 mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if92.432m-01a january 2011 rev a 90.432 mhz if saw filter 2.03 mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=150 nh, l2=180 nh output l3=150 nh, l4=82 nh source/load impedance 50 ?
oscilent part number 813-if92.432m-01a january 2011 rev a 90.432 mhz if saw filter 2.03 mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -20 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 90.432 - insertion loss at fo db - 20.2 22.0 passband ripple (fo 0.768 mhz) db p-p - 0.3 0.8 group delay variation (fo 0.768mhz) nsec - 45 100 absolute delay at fo sec - 1.78 - bandwidth at ?1.0 db mhz 1.90 2.03 - bandwidth at ?30.0 db mhz - 3.43 3.50 relative attenuation fo +1.75mhz db - 34 - fo -1.75mhz db - 34 - ultimate rejection level db 45 52 - temperature coefficient ppm/c - -0.03 -
oscilent part number 813-if92.432m-01a january 2011 rev a 90.432 mhz if saw filter 2.03 mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?30.0 db relative attenuation fo 1.75mhz
oscilent part number 813-if92.432m-01a january 2011 rev a 90.432 mhz if saw filter 2.03 mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo0.768mhz group delay variation fo0.768mhz smith chart
oscilent part number 813-if92.432m-01a january 2011 rev a 90.432 mhz if saw filter 2.03 mhz bandwidth product specification p. 5 www.oscilent.com vswr
|